TEN 30-2412WIN

DC/DC Converter TEN 30WIN Series, 30 Watt • • • • • 2“ x 1“ x 0.4“ shielded metal package • • • • • Over temperature protection Ultra wide 4:1 input voltage range Single- dual- and triple output models Very high efficiency up to 91 % Operating temperature range –40 °C to +75 °C UL 62368-1 IEC 62368-1 The TEN 30WIN series is a family of high performance 30W DC/DC converter modules featuring ultra wide 4:1 input voltage ranges in a compact low profile case with industry-standard footprint. Standard features include remote On/Off, output voltage trimming, over voltage protection, under voltage lockout, over temperature and short circuit protection. Typical applications for these products are battery operated equipment and distributed power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required and space is limited on the PCB. I/O isolation 1600 VDC Remote On/Off Adjustable output voltage 3-year product warranty Models Order Code Input Voltage Range TEN 30-2410WIN TEN 30-2411WIN TEN 30-2412WIN TEN 30-2413WIN TEN 30-2421WIN TEN 30-2422WIN TEN 30-2423WIN TEN 30-2431WIN TEN 30-2432WIN TEN 30-2433WIN TEN 30-2434WIN TEN 30-4810WIN TEN 30-4811WIN TEN 30-4812WIN TEN 30-4813WIN TEN 30-4821WIN TEN 30-4822WIN TEN 30-4823WIN TEN 30-4831WIN TEN 30-4832WIN TEN 30-4833WIN TEN 30-4834WIN 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Vnom Imax 3.3 VDC 5.1 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC +5 VDC +5 VDC +3.3 VDC +3.3 VDC 3.3 VDC 5.1 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC +5 VDC +5 VDC +3.3 VDC +3.3 VDC 7'500 mA 6'000 mA 2'500 mA 2'000 mA 3'000 mA 1'250 mA 1'000 mA 4'000 mA 4'000 mA 5'000 mA 5'000 mA 7'500 mA 6'000 mA 2'500 mA 2'000 mA 3'000 mA 1'250 mA 1'000 mA 4'000 mA 4'000 mA 5'000 mA 5'000 mA Output 2 Vnom Imax Output 3 Vnom Imax –5 VDC –12 VDC –15 VDC +12 VDC +15 VDC +12 VDC +15 VDC 3'000 mA 1'250 mA 1'000 mA 416 mA 333 mA 416 mA 333 mA –12 VDC –15 VDC –12 VDC –15 VDC 416 mA 333 mA 416 mA 333 mA –5 VDC –12 VDC –15 VDC +12 VDC +15 VDC +12 VDC +15 VDC 3'000 mA 1'250 mA 1'000 mA 416 mA 333 mA 416 mA 333 mA –12 VDC –15 VDC –12 VDC –15 VDC 416 mA 333 mA 416 mA 333 mA Efficiency typ. 86 % 88 % 89 % 89 % 88 % 87 % 87 % 88 % 88 % 87 % 87 % 86 % 88 % 90 % 91 % 88 % 88 % 88 % 88 % 88 % 87 % 87 % Options TEN-HS1 - Optional Heat Sink with Height = 0.22 inch: www.tracopower.com/products/ten-hs1.pdf - Optional model with 1.5 VDC / 8'500 mA Output and 9 - 36 VDC Input on demand - Optional model with 2.5 VDC / 8'000 mA Output and 9 - 36 VDC Input (backorder with MOQ non stocking item) - Optional model with 1.5 VDC / 8'500 mA Output and 18 - 75 VDC Input - Optional model with 2.5 VDC / 8'000 mA Output and 18 - 75 VDC Input www.tracopower.com October 25, 2023 Page 1 / 6 TEN 30WIN Series, 30 Watt Input Specifications Input Current - At no load - At full load Surge Voltage Under Voltage Lockout Reflected Ripple Current Recommended Input Fuse Input Filter 24 Vin models: 70 mA typ. (1.5 Vout model) 70 mA typ. (2.5 Vout model) 85 mA typ. (3.3 Vout model) 115 mA typ. (5.1 Vout model) 20 mA typ. (12 Vout model) 30 mA typ. (15 Vout model) 90 mA typ. (5 / -5 Vout model) 25 mA typ. (12 / -12 Vout model) 25 mA typ. (15 / -15 Vout model) 105 mA typ. (5 / 12 / -12 Vout model) 105 mA typ. (5 / 15 / -15 Vout model) 105 mA typ. (3.3 / 12 / -12 Vout model) 105 mA typ. (3.3 / 15 / -15 Vout model) 48 Vin models: 30 mA typ. (1.5 Vout model) 45 mA typ. (2.5 Vout model) 45 mA typ. (3.3 Vout model) 65 mA typ. (5.1 Vout model) 65 mA typ. (12 Vout model) 50 mA typ. (15 Vout model) 50 mA typ. (5 / -5 Vout model) 15 mA typ. (12 / -12 Vout model) 15 mA typ. (15 / -15 Vout model) 55 mA typ. (5 / 12 / -12 Vout model) 55 mA typ. (5 / 15 / -15 Vout model) 55 mA typ. (3.3 / 12 / -12 Vout model) 55 mA typ. (3.3 / 15 / -15 Vout model) 24 Vin models: 4'000 mA max. 48 Vin models: 2'000 mA max. (at Vin min.) 24 Vin models: 50 VDC max. (100 ms max.) 48 Vin models: 100 VDC max. (100 ms max.) 24 Vin models: 7 VDC min. / 8 VDC typ. / 8.8 VDC max. 48 Vin models: 15 VDC min. / 16 VDC typ. / 17.5 VDC max. 20 mA typ. 24 Vin models: 6'300 mA (slow blow) 48 Vin models: 3'150 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Pi-Type Output Specifications Output Voltage Adjustment Voltage Set Accuracy ±10% (single output models only) (By external trim resistor) See application note: www.tracopower.com/overview/ten30win Output power must not exceed rated power! ±1% max. (±5 % for auxilary outputs) All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com October 25, 2023 Page 2 / 6 TEN 30WIN Series, 30 Watt Regulation - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) Ripple and Noise (20 MHz Bandwidth) - Cross Regulation (25% / 100% asym. load) - single output - dual output - triple output Capacitive Load - single output - dual output - triple output Minimum Load - single output - dual output - triple output single output models: 0.2% max. dual output models: 0.25% max. (±5 Vout models) 0.2% max. (other dual models) triple output models: 1% max. 5% max. (aux) single output models: 0.5% max. dual output models: 1% max. (Output 1) 1% max. (Output 2) triple output models: 1% max. (Output 1) 5% max. (Output 2) 5% max. (Output 3) dual output models: 5% max. 1.5 Vout: 2.5 Vout: 3.3 Vout: 5.1 Vout: 12 Vout: 15 Vout: 5 / -5 Vout: 12 / -12 Vout: 15 / -15 Vout: 5 / 12 / -12 Vout: 5 / 15 / -15 Vout: 3.3 / 12 / -12 Vout: 3.3 / 15 / -15 Vout: 1.5 Vout: 2.5 Vout: 3.3 Vout: 5.1 Vout: 12 Vout: 15 Vout: 5 / -5 Vout: 12 / -12 Vout: 15 / -15 Vout: 5 / 12 / -12 Vout: 5 / 15 / -15 Vout: 3.3 / 12 / -12 Vout: 3.3 / 15 / -15 Vout: 1.5 Vout: 2.5 Vout: 3.3 Vout: 5.1 Vout: 12 Vout: 15 Vout: 5 / -5 Vout: 12 / -12 Vout: 15 / -15 Vout: 5 / 12 / -12 Vout: 5 / 15 / -15 Vout: 3.3 / 12 / -12 Vout: 3.3 / 15 / -15 Vout: Temperature Coefficient Start-up Time Short Circuit Protection 100 mVp-p typ. (w/ 1 µF, 50 V MLCC) 100 mVp-p typ. (w/ 1 µF, 50 V MLCC) 100 mVp-p typ. (w/ 1 µF, 50 V MLCC) 100 mVp-p typ. (w/ 1 µF, 50 V MLCC) 150 mVp-p typ. (w/ 1 µF, 50 V MLCC) 150 mVp-p typ. (w/ 1 µF, 50 V MLCC) 100 / 100 mVp-p typ. (w/ 1 µF, 50 V MLCC) 150 / 150 mVp-p typ. (w/ 1 µF, 50 V MLCC) 150 / 150 mVp-p typ. (w/ 1 µF, 50 V MLCC) 50 / 75 / 75 mVp-p typ. (w/ 0.1 µF, 50 V MLCC) 50 / 75 / 75 mVp-p typ. (w/ 0.1 µF, 50 V MLCC) 50 / 75 / 75 mVp-p typ. (w/ 0.1 µF, 50 V MLCC) 50 / 75 / 75 mVp-p typ. (w/ 0.1 µF, 50 V MLCC) 20'000 µF max. 20'000 µF max. 20'000 µF max. 14'400 µF max. 3'000 µF max. 2'000 µF max. 3'000 / 3'000 µF max. 2'000 / 2'000 µF max. 1'300 / 1'300 µF max. 8'000 / 340 / 340 µF max. 8'000 / 220 / 220 µF max. 15'000 / 340 / 340 µF max. 15'000 / 220 / 220 µF max. 0 % of Iout max. 0 % of Iout max. 0 % of Iout max. 0 % of Iout max. 0 % of Iout max. 0 % of Iout max. 0 % of Iout max. 0 % of Iout max. 0 % of Iout max. 10 % of Iout max. 10 % of Iout max. 10 % of Iout max. 10 % of Iout max. (Operation at lower load will not damage the converter, but it may not meet all specifications) ±0.02 %/K max. 50 ms max. (single & dual models) 30 ms max. (triple models) Continuous, Automatic recovery All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com October 25, 2023 Page 3 / 6 TEN 30WIN Series, 30 Watt Output Current Limitation Overvoltage Protection Transient Response 150% typ. of Iout max. 125% typ. of Vout nom. (depending on model) 2 VDC (1.5 Vout model) 3.3 VDC (2.5 Vout model) 3.9 VDC (3.3 Vout model) 6.2 VDC (5 / 5.1 Vout model) 15 VDC (12 Vout model) 18 VDC (15 Vout model) 370 mV max. (25% Load Step) 250 µs typ. (25% Load Step) - Peak Variation - Response Time Safety Specifications Standards EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 www.tracopower.com/overview/ten30win PD 2 OVC I - IT / Multimedia Equipment - Certification Documents Pollution Degree Over Voltage Category EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions EMS Immunity External filter proposal: Air: Contact: - Electrostatic Discharge - RF Electromagnetic Field - EFT (Burst) / Surge Ext. input component: - Conducted RF Disturbances - PF Magnetic Field Continuous: 1 s: EN 55032 class A (with external filter) EN 55032 class B (with external filter) EN 55032 class A (with external filter) EN 55032 class B (with external filter) www.tracopower.com/overview/ten30win EN 61000-4-2, ±8 kV, perf. criteria A EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 10 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV, perf. criteria A 24 Vin models: KY 330 µF / 50 V 48 Vin models: KY 220 µF / 100 V EN 61000-4-6, 10 Vrms, perf. criteria A EN 61000-4-8, 100 A/m, perf. criteria A EN 61000-4-8, 1000 A/m, perf. criteria A General Specifications Relative Humidity Temperature Ranges Power Derating - Operating Temperature - Case Temperature - Storage Temperature - High Temperature Over Temperature Protection Switch Off - Protection Mode - Measurement Point Cooling System Remote Control - Voltage Controlled Remote (passive = on) - Off Idle Input Current - Remote Pin Input Current Altitude During Operation 95% max. (non condensing) –40°C to +75°C +105°C max. –55°C to +125°C Depending on model See application note: www.tracopower.com/overview/ten30win 115°C max. (Automatic recovery at 105°C typ.) Case Natural convection (20 LFM) On: 3.0 to 12 VDC or open circuit Off: 0 to 1.2 VDC or short circuit Refers to 'Remote' and '-Vin' Pin 3 mA typ. -0.5 to 0.5 mA 5'000 m max. All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com October 25, 2023 Page 4 / 6 TEN 30WIN Series, 30 Watt Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability - Input to Output, 60 s - Input to Case, 60 s - Output to Case, 60 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF Washing Process Environment - Vibration - Mechanical Shock - Thermal Shock Housing Material Base Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight Thermal Impedance 387 - 473 kHz (PWM) (single, dual output models) 360 - 440 kHz (PWM) (triple output models) Functional Insulation 1'600 VDC 1'600 VDC 1'600 VDC 1'000 MΩ min. 1'500 pF max. 1'300'000 h (single and dual output models) 1'200'000 h (triple output models) (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf MIL-STD-810F 7.6 g, 3 axis, 60 min, 20-2000 Hz MIL-STD-810F 40 g, 3 axis, terminal peak sawtooth, 11 ms MIL-STD-810F -55°C to +125°C, 72 cycles, 30 min each Copper, Nickel plated Non-conductive FR4 (UL 94 V-0 rated) Epoxy (UL 94 V-0 rated) Copper Nickel (2 - 3 µm) Tin (3 - 5 µm), matte Metal Case PCB Mount THD (Through-Hole Device) 2" x 1" Lead-Free Wave Soldering 260°C / 6 s max. 30.5 g 12 K/W typ. 10 K/W typ. (with Heat Sink) www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a, 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) 6d4d2567-f4c4-424d-82c4-6afb32e4abf1 - Case to Ambient Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/ten30win All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com October 25, 2023 Page 5 / 6 TEN 30WIN Series, 30 Watt Outline Dimensions Single and dual output models 15.24 (0.600) Pinout 5.08 (0.200) Pin 2.54 Single Dual (0.100) 3 2 50.8 (2.00) 2.5 (0.10) 45.72 (1.800) +Vin (Vcc) 2 –Vin (GND) 3 Remote On/Off 4 +Vout 1 Bottom view 6 1 5 5 –Vout Common 6 Trim –Vout 4 10.16 5.6 (0.400) (0.22) 20.32 10.2 (0.800) (0.40) 25.4 (1.00) Dimensions in mm (inch) Pin diameter: 1.0 ±0.1 (0.04 ±0.004) Tolerances: x.x ±0.5 (x.xx ±0.02) x.xx ±0.25 (x.xxx ±0.01) Triple output models 12.7 Pinout (0.500) 5.08 (0.200) Pin 7.62 (0.300) 3 2 1 50.8 (2.00) 2.5 (0.10) 45.72 (1.800) Bottom view 7 6 5 Triple 1 +Vin (Vcc) 2 –Vin (GND) 3 Remote On/Off 4 Output 2 5 Output 3 6 Common 7 Output 1 4 5.08 (0.200) 5.6 25.4 (1.00) (0.22) 10.2 (0.40) Dimensions in mm (inch) Pin diameter: 1.0 ±0.1 (0.04 ±0.004) Tolerances: x.x ±0.5 (x.xx ±0.02) x.xx ±0.25 (x.xxx ±0.01) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. October 25, 2023 Page 6 / 6